2433 Minnehaha Ave | Minneapolis, MN 55404 | P: 612-729-9313 | F: 612-729-5577 | general@dbgmn.com
Capabilities
CENTERLESS GRINDING
Size Range: .035” TO 4.00”
Lengths: Up to 24 feet
Piece Parts - Thru Feed
Max Weight: 400 lbs. per 12 ft. bar
Max Weight: 400 lbs. per 12 ft. bar
TOLERANCES ON 12 FT. BARS
.035” to .500” as close as .0002
.500” to .625” as close as .0003
.750” to 1.1250 as close as .0004
1.250” to 1.750” as close as .0005
1.750 and over call for info on tolerances closer than .001
Micro finishes as low as 8 RMS
1.750 and over call for info on tolerances closer than .001
Micro finishes as low as 8 RMS
MATERIALS
Solid or tubular products
All carbon steel, all stainless steels
most alloys, titaniums, aluminum, copper, brass, and exotics
Our stock or your stock
All carbon steel, all stainless steels
most alloys, titaniums, aluminum, copper, brass, and exotics
Our stock or your stock
QUANTITIES
One bar to mill runs
We can supply material and grinding complete
Warehouse or mill quantities
Certifications upon request
We can supply material and grinding complete
Warehouse or mill quantities
Certifications upon request
PACKAGING
Wooden boxing or board and wrap for smaller quantitiesFull burlap wrapping
Full length plastic meshing
Plastic mesh collers and full wrapping
Fiberboard tubing by special order
Burlap under bands N/C
PRECISION STRAIGHTENING
Medart Bar Straightening: Size range 3/16" to 1.250" O.D.
Tolerances as close as .005 TIR per foot
Press Straightening: Size range 3/4" to 4" O.D.
Tolerances as close as .005 TIR per foot
Press Straightening: Size range 3/4" to 4" O.D.
PRECISION SAW CUTTING
3/8” to 4” O.D.
